GODEX 2200 DRIVER DOWNLOAD

0 Comments

Once the USB cable is connected from PC to the printer, PC will automatically detect the new device and begin the installation process. In the Self-Test Mode, the printer will print out a test sample each time when the Feed key is pressed. Please check the specific print mode, then go into the Setting Mode after power on the printer. TPH print line adjustment 1 When printing stiff or thick paper, the print line needs to be moved forward paper feed direction in order to achieve better printing quality. Table Of Contents 1.

Uploader: Vozshura
Date Added: 12 November 2011
File Size: 17.94 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 74666
Price: Free* [*Free Regsitration Required]

Godex EZ Plus label printing machine | TEA Industrial Adhesives

Please check the specific print mode, then go into the Setting Mode after power on the printer. Rolls of ribbon up to m length can be used with any type of winding coloring layer inside or outside.

Page of 34 Go. After the TPH print line adjustment is completed, use the flat tip screwdriver to tighten up the TPH screws A clockwise as indicated by the arrows. Use a flat tip screwdriver as shown in the photoand turn the screws B clockwise to move the TPH Got it, continue to print.

Godex EZ-2200 User Manual

To print the manual completely, please, download it. Table Of Contents 1. Remove the two screws in the front.

  INTEL DQ35JO LAN DRIVER

One side of the printout not being printed clearly or ribbon wrinkle occurs, adjust the TPH Spring Box position or pressure to cure the problem. Avoid pushing the guide too far in to damage the label edge.

By pressing ‘print’ button you will print only current page.

For example, if the print job contains 10 labels, press the Pause key after 2 labels are printed to stop printing; Use gode flat tip screwdriver to loosen the TPH screws A on each side of the print head counterclockwise for one circle as indicated by the Close the Top Cover to complete the cutter installation.

To do this, just connect the keyboard to the printer, select the desired label from the list downloaded, specify number of the copies and start printing. At the same time they can be printed without computer.

Power on the PC. Flip the Print Head Lever back to its original position.

In the Self-Test Mode, the printer will print out a test sample each time when the Feed key is pressed. Liner Rewind Sensor and the printer will stop printing until liner has been removed from the printer. Close the top cover to complete the ribbon installation.

It differs by the increased service life and optimal protection against external influences due to the mechanisms and case made of metal. The Self-Test function in a printer will help the user to troubleshoot whether the printer is operating normally. With robust metal outer casing and inner mechanism, the EZ is designed to be durable, tough and reliable, even govex the harshest environments. Wrap the ribbon around the Ribbon Shaft Rod and stick 2200 ribbon onto the empty ribbon roll.

  GIGABYTE GA-K8N51GMF-RH LAN DRIVER DOWNLOAD

Place the printer onto a smooth surface, and open the top cover.

Communication Interface Paralle Interface Handshake: Open the top cover. The strength and distribution of clamping pressure is adjusted by two stops.

Godex EZ-2200 Plus Label Printer

Power off the printer, press and hold the Pause key. Take the goeex cable, plug the cable switch to the power socket, and then connect the other end of the cable to the printer power socket. Align the label roll with the Label Width Guide. Install the Rewinder unit.

Godex Print head dpi for Godex EZPLUS/ EZi

Also See for EZ Programmer’s manual – 22 pages. Flip the Label Feed Guide back down to its original position, and clip the guide in position. When printing, no ribbon is necessary; it only requires direct thermal media.